Canon Printer Canon Selphy Dye Sublimation Printer User Manual

0

Out of 0 Ratings

Owner's of the Canon Printer Canon Selphy Dye Sublimation Printer gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 56
 
45
Commercially available USB
cable
Prepare SELPHY and connect to a computer.
O Turn off SELPHY and remove the memory card or USB
ash memory.
O Insert an ink cassette and a paper cassette that contain
paper you want to use into SELPHY (pp. 7 – 10).
O Use the USB cable to connect SELPHY to the computer.
O Refer to the user guides included with the cable and
computer for handling instructions.
Turn on SELPHY.
O Press the q button to turn on SELPHY.
Finish installation.
O When the installation nishes, click [Restart] to restart
the computer and complete the installation.
Print.
O Print as described in Steps 2 to 7 on p. 39.
Macintosh
O Install the software as described in Step 1 on p. 38.
O Connect SELPHY to the computer as described in above Steps 2 to 3 and turn SELPHY on.
O Select [
] from the menu, and click [System Preferences] r [Print & Fax] to open the [Print & Fax]
screen. Click [+] to select [CP900] from the pop-up window, then click [Add].
O Print as described in Steps 2 to 7 on p. 39.
O SELPHY may not operate correctly if it is connected to a computer via a USB hub.
O SELPHY may not function properly if other USB devices (with the exception of a USB mouse
or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
O Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without
disconnecting the USB cable. Restart the computer if the computer does not recover properly.
O For details on handling the computer, refer to the user guide included with your computer.
O You can start the software automatically when SELPHY and the computer are connected by a USB cable by
setting [Start SELPHY Photo Print automatically] to [On] in the screen displayed by clicking [Setting] in Step 3
described on
p. 39 .
2
3
4
5
COPY

   Find Your Products By Category