0
Owner's of the Canon Digital Camera Canon EOS 70D DSLR Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
3 Setting Noise ReductionN
142
Cautions for Setting Multi Shot Noise Reduction
If there is significant misalignment in the image due to camera shake, the
noise reduction effect may be minimal.
If you are handholding the camera, keep it steady to prevent camera
shake. Using a tripod is recommended.
If you shoot a moving subject, the subject’s movement may leave
afterimages or the surrounding area of the subject may become dark.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.) or flat, single-tone images.
Recording the image to the card will take longer than with normal
shooting. During the processing of the images, “buSY” will be displayed
in the viewfinder and on the LCD panel and you cannot take another
picture until the processing is completed.
RAW images cannot be selected. You cannot use AEB and WB
bracketing. [z4: Long exp. noise reduction], [z4: Dust Delete
Data], [z4: Multiple exposure], and [z4: HDR Mode] cannot be set.
If any of these has already been selected or set, [Multi Shot Noise
Reduction] cannot be set.
Flash shooting is not possible. The AF-assist beam will be emitted
according to the [8C.Fn II-5: AF-assist beam firing] setting.
You cannot set [Multi Shot Noise Reduction] for bulb exposures.
If you turn off the power, change the shooting mode to a Basic Zone
mode or bulb, or switch to movie shooting, the setting will automatically
switch to [Standard].
Direct printing is not possible (p.346).
If you play back a 1 image with the camera or print an image directly, the
effect of the high ISO speed noise reduction may look minimal. Check the
noise reduction effect or print noise-reduced images with Digital Photo
Professional (provided software, p.456).
COPY
Find Your Products By Category
Please Login
