0

Out of 0 Ratings

Owner's of the Canon Digital Camera Canon EOS 70D DSLR Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 468
 
268
You can shoot movies while recording
sound with the built-in stereo
microphone or a commercially-available
stereo microphone. You can also freely
adjust the sound-recording level.
Set the sound recording with [Z2:
Sound recording].
[Auto] : The sound-recording level is adjusted automatically. Auto
level control will operate automatically in response to the
sound level.
[Manual] : For advanced users. You can adjust the sound-recording
level to one of 64 levels.
Select [Rec. level] and look at the level meter while turning
the <5> dial to adjust the sound-recording level. While
looking at the peak hold indicator (3 sec.), adjust so that the
level meter sometimes lights up the “12” (-12 dB) mark on
the right for the loudest sounds. If it exceeds “0”, the sound
will be distorted.
[Disable] : Sound will not be recorded.
[Wind filter] : When [Enable] is set, it reduces the wind noise when
recording outdoors. This feature takes effect only with
the built-in microphone.
Note that [Enable] will also reduce low bass sounds, so
set this function to [Disable] when there is no wind. It
will record a more natural sound than with [Enable].
[Attenuator] : Even if [Sound rec.] is set to [Auto] or [Manual] before
shooting, sound distortion may still result if there is a
very loud sound. In such a case, setting it to [Enable] is
recommended.
3 Setting the Sound Recording
Sound Recording/Sound-Recording Level
Wind Filter/Attenuator
COPY

   Find Your Products By Category