0
Owner's of the Nikon Digital Camera 13302 gave it a score of 0 out of 5. Here's how the scores stacked up:
31
X
D Memory Cards
• Memory cards may be hot after use.
Observe due caution when removing memory cards
from the camera.
• Turn the power off before inserting or removing memory cards.
Do not remove memory
cards from the camera, turn the camera off, or remove or disconnect the power source
during formatting or while data are being recorded, deleted, or copied to a computer.
Failure to observe these precautions could result in loss of data or in damage to the
camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not bend, drop, or subject to strong physical shocks.
• Do not apply force to the card casing.
Failure to observe this precaution could damage
the card.
• Do not expose to water, heat, high levels of humidity, or direct sunlight.
• Do not format memory cards in a computer.
A Using Two Memory Cards
Slot 1 is for the main card; the card in slot 2 plays a backup or
secondary role. If the default setting of Overflow is selected for Role
played by card in Slot 2 (0 69) when two memory cards are
inserted, the card in slot 2 will only be used when the card in slot 1 is
full.
Slot 1
Slot 2
The control panel shows the slot or slots that currently hold a
memory card (the example at right shows the icons displayed when a
card is inserted in each slot).
If the memory card is full or locked or an
error has occurred, the icon for the affected card will flash (0 334).
Control panel
Information display
A The Write Protect Switch
SD memory cards are equipped with a write protect switch
to prevent accidental loss of data. When this switch is in the
“lock” position, the memory card can not be formatted and
photos can not be deleted or recorded (a warning will be
displayed in the monitor if you attempt to release the
shutter). To unlock the memory card, slide the switch to the
“write” position.
Write-protect switch
8
GB
Find Your Products By Category
Please Login
